 22MM ID Cloth braided hose? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| TRP |
 Apr 14 2026, 02:22 PM
Post
#1
|
|
Member  Group: Members Posts: 295 Joined: 2-September 23 From: Morgan Hill, CA Member No.: 27,559 Region Association: None 
 |
Hello Gang,
As I'm waiting to get my new motor back & installed, I am collecting all the proper hoses to freshen up the L-Jet install. I have seen several diagrams and suggested lengths for the hose sizes, based on this diagram, it looks like I need about 1' of 22mm ID hose from the Oil filler to the rubber intake boot: (IMG:http://www.914world.com/bbs2/uploads/post-24231-1611263503.jpg) I can't seem to find that 22mm ID hose at any of our usual suppliers. Do you all have any suggestions for where I can find the 22mm ID cloth braided hose? Also wondering if this diagram is correct for the ID dimensions for the other hoses, as it contradicts other diagrams I've seen. (IMG:http://www.914world.com/bbs2/uploads/post-15080-1740549254.jpg) When looking at the two items you will see that: The top diagram calls for sizes: 4,5,10,12, and 22mm ID sizes Jeff's diagram calls for sizes: 4,5,13,15,19, and 22mm ID sizes. If Jeff's is correct, I have not been able to find the 19mm and/or 22mm sizes. Any help pointing me in the right direction would be appreciated. Thanks Ted |
   |
 
|
Posts in this topic
TRP 22MM ID Cloth braided hose? Apr 14 2026, 02:22 PM
DennisV Does it have to be clothe braided?
I bought some ... Apr 14 2026, 02:49 PM TRP
Does it have to be clothe braided?
I bought some... Apr 14 2026, 03:59 PM  |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 14th April 2026 - 04:35 PM |
Invision Power Board
v9.1.4 © 2026 IPS, Inc.